Christy 458 OC

Available exterior colors of the hovercraft

                                                 

There are three different cab options available: open cabin (OC), partial cabin (PC), full cabin (FC).

Christy 458 OC hovercraft on sale specifications:

Despite the fact that the new five-seater hovercraft Christy 458 is constructed on a new platform, fundamental differences from the six-seater model Christy had two: size and capacity. However, this did not affect the patency, maneuverability, reliability and comfort inherent in the company's Christy Hovercraft.

Dimensions
Not on the air-cushion (L.W.H.)	5150 × 2200 × 2300 mm
On the air-cushion (L.W.H.)	5700 × 3100 × 2650 mm
Inside the cabin	2200 × 1550 × 1300 mm
Clearance	400-450 mm
Operating conditions hovercraft
Height overcome obstacles	300-600 mm unsmoothed and smoothed ledges
Wave height	to 500 mm
Environment temperature	-30 to +35 ° C.
Gradeability	up to 15 degrees from a standing start to 40 degrees acceleration
Type of surface	Ice and snow thicknesses, fresh and salt water of any depth, silt, sand, grass, wetlands, flat desert
The maximum allowable wind speed	13 m / s with gusts up to 15 m / s
Speed ​​characteristics hovercraft
The recommended speed for safe movement	40-50 km / h - the beach, shallow water of 30-40 km / h - the short grass of 50-60 km / h - smooth ice 50-60 km / h - packed snow 40-50 km / h - economical cruising speed
Maximum rate on a solid surface	up to 90 km / h
Design Features
Hull construction hovercraft	The housing is completely made of composite materials.Individual elements in the form of sandwich panels made of fiberglass and polyurethane foam with an outer finishing layer to ensure 100% positive buoyancy. Not subject to corrosion and icing. Are easy to repair.
Type flexible skirt (skirt)	Bunk (upper tier - inflated balloon is tapered from front to back of the higher sections of the front for improved wave, the lower tier - independent segments). All segments are independent and are easily replaced in the field.
The structure of the skirt	Cylinder and the segments are made of nylon impregnated with urethane. The segments are attached to the cylinder nuts and bolts polyamide.
Buoyancy	Bottom based on sandwich panels of polyurethane foam and fiberglass provides 100% buoyancy. Even if the interior completely fill with water, hovercraft will remain afloat.
Number of seats	1+3 passengers
Cabin	Standard 4 spot enclosed cab or modification in whole or in part open cockpit. Windshield - Triplex
Physical characteristics of the hovercraft
Payload	450 kg (including fuel, security, and four passengers)
Overload Payload	Up to 500 kg (when driving on a solid surface)
Weight vessel	400 - 450 kg, depending on the configuration
Engines	Lift: 23 hp four-stroke power Vanguard (DAIHATSU Japan); Thrust: 35 hp four-stroke power Vanguard (DAIHATSU Japan)
Fuel capacity	The main tank 40 liters
Fuel consumption	8-15 liters / hour depending on the operating conditions and the type of surface
Type of fuel	Gasoline A-92
Christy Management hovercraft
Traction system	Traction (marching) three-blade propeller aircraft - 1600mm in diameter made of composite materials Lifting fan - 9-blade propeller axial diameter of 710 mm
Transmission	On the basis of the gear reducer factory-built aircraft, made in Italy
Managing Exchange	With two vertical rudders
Pitch control	With two horizontal rudders fitted behind the fan ring
Instruments and mechanisms
Navigation Devices	All vessels are equipped with a full range of electrical equipment. Provided a large number of options, including air conditioning, navigation equipment, multimedia equipment, rescue equipment, special equipment for hunting and fishing
Electrical	Engines equipped with: march - a powerful generator;Discharge - magdino
Bailing	Electric bilge pump, extra - hand pump
Firefighting	Portable carbon dioxide fire extinguisher
Navigation and communication	Prepared a place for the marine compass, GPS-navigator, card plotter and radio. FM-radio and CD-player.