Hovercraft manufacturer
Design, production, sale and service of hovercraft for personal and commercial use. 15+ years of successful experience!
+7(812) 407-3628
Christy 6199 Military Heavy

Christy 6199 Military Heavy

Price: Call
Passenger seats: 6
Payload: 750 kg (1653.5 lb)
Thrust engine: 176 hp
Lift engine: 23 hp
Fuel consumption: 15-20 lt/hr (4 - 5.3 gl/hr)
Tank capacity: 2×80 lt (2×21.1 gal)
Max speed: 100 kph (62 mph)
Weight of hovercraft: 900-960 kg (1984-2116 lb)
Dimensions (L.W.H.) 6150×2300×2400mm (242×90×94.5")

Christy 6199 Heavy Military hovercraft specifications:

Hovercraft Christy 6199 is designed for use in difficult climatic and weather conditions on any more or less flat surface with maximum safety at any time of the year. All nodes and components are made ​​of imported high quality component parts and composite materials. Among the unique features of Christy 6199 are the following:

  • the body is made of composite plastic, which are much lighter and stronger traditionally used aluminum;
  • flexible enclosure air cushion (skirt) is made of heavy-duty Hypalon material with the use of segment system and fully sealed cavity pillows, which increases stability, provides more lift and speed. Possible repair is reduced to the simple replacement of worn-out segments;
  • rudder trim system, softening Hovercraft reaction to a sudden obstacles (waves, boulders), and significantly improves the maneuverability and stability;
  • controlled distribution of traction between the lift and sustainer system reduces fuel consumption and increases the range of the ship;
  • the total weight of the structure and the resulting vibrations are minimized through the use of original attachment system powertrains;
  • ATV is very easy and absolutely unsinkable through the use of sandwich structures.


Not on the pillow (L.W.H.) 6150 × 2350 × 2400 mm 
On the pillow (L.W.H.)  6720 × 2970 × 2890 mm 
Inside the cabin  3160 × 1500 × 1350 mm
Clearance  300-400 mm 

Operating conditions hovercraft

Height overcome obstacles  300-600 mm unsmoothed and smoothed ledges
Wave height  1000 mm 
Environment temperature  -20 to +40 ° C. 
Gradeability  up to 15 degrees from a standing start
to 40 degrees acceleration 
Type of surface  Salt and fresh water of any depth, snow and ice cover any thickness, sand, mud, grass, swamp, flat desert 
The maximum allowable wind speed 13 m / s with gusts up to 15 m / s (at full load)
10 m / s with gusts up to 13 m / s (at part load)

Speed ​​characteristics  hovercraft

The maximum recommended speed (for safety)  50-90 km / h (27-49 knots) beach, shallow water
of 50-65 km / h (27-35 knots) short grass
60-100 km / h (32-54 knots) smooth ice
50-85 km / h ( 27-46 knots) packed snow
40-60 km / h (22-32 knots) recommended
40-45 km / h (22-35 knots) economical cruising speed 

Design Features 

Hull construction hovercraft  The body is made from composite materials. Case details in the form of sandwich panels made of fiberglass and polyurethane foam with an outer finishing layer. Easy to fix 
Type flexible skirt (skirt)  Bunk (upper tier - inflated balloon is tapered from front to back of the higher sections of the front for the best waves of overcoming, the lower tier - independent segments for better retention of air in the cushion and easily replaceable) 
The structure of the skirt  Cylinder and the segments are made of nylon impregnated with urethane. The segments are attached to the cylinder by bolts and nuts 
Buoyancy 100% unsinkable thanks to the bottom of the sandwich panels of polyurethane foam and fiberglass. The foam volume - 1200 liters 
Number of seats  1 pilot and 5 passengers 
Cabin  6ti local insulated cabin. Windshield - Triplex 

Physical characteristics of the hovercraft

Payload  600 kg (including fuel, 6 passengers and safety equipment)
Overload Payload  750 kg
Weight vessel  920 kg, depending on the configuration 
Engines  Marching: Subaru EJ-25 176 hp (Japan) or Subaru FB-20 176 hp
Pressure: four, 600 cm 3, 23 hp (Japan) 
Fuel capacity  80 liters 
Fuel consumption  10-20 liters / hour depending on the load surface and 
Type of fuel  Gasoline A-92 or A-95

Management hovercraft Christy 6199

Traction system  Aviation 6-bladed propeller made of composite materials with a diameter of 1600 mm. 
Lift system  9-axial propeller blade diameter 710 mm, rotating speed - 3000 r / min 
Transmission  The force of the main engine is transmitted to the screw gear reducer Italy.
Managing Exchange  With vertical rudder 
Pitch control  With two horizontal rudders fitted behind the fan ring 

Instruments and mechanisms 

Navigation Devices  All vessels are equipped with a full range of electrical equipment. Provided a large number of options, including air conditioning, navigation equipment, multimedia equipment, rescue equipment, special equipment for hunting and fishing 
Electrical  Main engine generator 600 W magdino blower motor 150 W, battery 55-90 ampere-hours at -18 ° C, the supply voltage 13 
Bailing  Electric bilge pump, extra - hand pump 
Firefighting  Portable carbon dioxide fire extinguisher, fixed carbon dioxide fire extinguisher with remote control in the engine compartment 
Navigation and communication  Prepared a place for the marine compass, GPS-navigator, card plotter and radio 

Photo gallery of Hovercraft - Christy 6199 Military Heavy

Best of the best Christy hovercraft video 2019Best of the best Christy hovercraft video 2019Best of the best Christy hovercraft video 2019

Exclusive price for built hovercraft Christy 458 OC

get catalog

Best of the best Christy hovercraft video

Exclusive price for built hovercraft Christy 458 OC

New models for every taste, from private, recreational - to commercial and expeditionary!

More news ...




Call now!
Request a call back